Close
The Vertical Offshore Reference Frames research project is an ongoing collaboration between University College London and the United Kingdom Hydrographic Office
About
VORF听commenced in 2005, with the aim of providing the ability to transform vertical height information in the coastal and offshore zones between reference levels such as:
- Chart Datum (the reference level for nautical charts)
- Mean Sea Level
- Lowest Astronomical Tide
- Mean Low Water Springs
- European Terrestrial Reference Frame (ETRF89)
- Ordnance Datum (Newlyn)
- Ordnance Datum (Poolbeg)
The VORF solution for UK and Ireland was completed in 2008 and has become an essential tool in operational hydrography.听 Current focus is on extending the concept globally for the offshore zone beyond 12 nautical miles from land.
Find out more about our collaborator, by visiting the听听飞别产蝉颈迟别.
Please note, links on this page may direct to external websites.听
People
- 听is Co-Principal Investigator for the VORF Project.听 He is Professor of Space Geodesy at CEGE,听and the Director of the Space Geodesy and Navigation Laboratory.听
- 听is Co-Principal Investigator for the VORF Project.听 He is a Senior Lecturer in Geodesy and is Programme Director for MSc Geospatial Sciences (Hydrographic Surveying).
- Dr Jim Turner is Technical Lead for the VORF Project.听
What is VORF?
- High resolution digital models of reference surfaces such as mean sea level (MSL), lowest astronomical tide (LAT) and Chart Datum (CD) all modelled with respect to the terrestrial reference frame used for GPS/GNSS positioning: ETRF89 (or ITRF).
- The software to transform rapidly and robustly between these different datums.
Until recently, hydrographic surveys have generally been kept separate from land surveys, and surveys at sea often used such sparse data sets that changes in the datum were not readily apparent.
All this is changing. With the advent of technology such as GPS and LIDAR, and increasing interest in areas such as the coastal zone, there is an imperative need for a system that will seamlessly transform between all the different reference surfaces and extend our knowledge of vertical datums offshore. This is what VORF will achieve, through a set of transformation models integrated into one software package.
Once such a system is in place there are many different applications that could potentially make use of it. To take just one example, any ship equipped with a high precision GPS receiver and using the VORF transformation software will effectively become its own tide gauge, with no need to rely on observations made at remote ports. This is likely to have a significant impact on marine safety, but the efficiency implications for activities such as hydrographic surveying are also significant.
The VORF Surfaces
The VORF solution for UK and Ireland allows the transformation of data between vertical reference frames, both offshore and land.听 To accomplish this, each offshore reference frame is represented as a continuous surface within the European Terrestrial Reference Frame (ETRF89), with a gridded spatial resolution of approximately 1km.听听
- European Terrestrial Reference Frame (ETRF89)
ETRF89 is the de facto standard reference frame for precise GPS/GNSS surveying in Europe. VORF also includes听.
- Mean Sea Level (MSL)
The VORF mean sea surface was developed by combining satellite altimetry observations of sea level with tide gauge measurements. Out to sea the altimetry derived mean sea surface developed by听听is the dominant component; in the coastal zone sea surface topography was interpolated using a least squares collocation procedure, with the tide gauge data now included.
The PSMSL monthly observations of sea level were invaluable in removing meteorological and seasonal bias from short term observations of MSL in the ATT database. Secular trends were derived and applied to ensure all sea level observations centered on the epoch 2000.00.听 The OSGM05 geoid was used as the base for all interpolation, and a smoothly continuous model of MSL was developed by recombination of the sea surface topography with this geoid model.
Two sources of tide gauge data were used: the Permanent Service for Mean Sea Level () and the Admiralty Tide Tables ().听 Heights of Chart Datum, and hence MSL, were established in ETRF89 by one of听 four methods:
- Separation models between land datums and ETRF89 (OSGM02)
- The VORF Observation Campaigns (see below)听
- Communications with local mapping authorities (e.g. Isle of Man)
- Lowest Astronomical Tide (LAT)
Lowest Astronomical Tide is the lowest level the tide will reach over a 19 year period under normal meteorological conditions. In collaboration with听听surface models of the tidal level LAT were derived with respect to the equilibrium mean sea level from a combination of tide gauge data and hydrodynamic tide models. The following relationship then enables the LAT modelling to be positioned in the reference frame ETRF:
- Further Tidal Levels
Highest Astronomical Tide (HAT), Mean Low Water Springs (MLWS) and Mean High Water Springs (MHWS).
- Chart Datum (CD)
Chart Datum is a level so low so the tide will rarely fall below it, and is the reference to which the depths on nautical charts are referred.听 The definition of Chart Datum varies depending on location and tidal regime.听 In the UK and Ireland CD is generally defined as being Lowest Astronomical Tide, or as being very close to it.听听
There are in the environs of 700 Chart Datum definitions in the UK and Ireland; the height of each one in ETRF89 was established by a variety of techniques.听 Where direct GPS observations or the use of transformation tools were not possible, relative methods were used to 'hang off' the level from the MSLETRF听and LATETRF听蝉耻谤蹿补肠别蝉.
The Chart Datum surface was computed by developing a corrector surface which 'warped' the LATETRF听surface to precisely coincide with the known Chart Datum definitions.听
- National Land Datums
To integrate the offshore reference frames with the onshore land datums, within the small band along the coast VORF permits the use of land datums such as OD Newlyn, OD Poolbeg, OD Belfast and various island land datums.听 The majority of these听are consistent with the Ordnance Survey听OSGM02听tool.
- River Datums
All navigable rivers within UK and Ireland, and all impounded ports, are included in VORF.听 Separate techniques model the variations in height in CD and MSL along the path of the river.
Observation Campaigns
Historically Chart Datum is quoted either with respect to a local benchmark or to the national datum (such as OD Newlyn).听To acquire the heights of Chart Datum in ETRF89, the primary method is to use a transformation model which provides the link to a national datum.听In many locations this is not possible, for example on the remote uninhabited Isle of Sule Skerry there is no land datum and Chart Datum is referenced to tide gauge benchmarks, as shown in the image below.
The VORF team undertook several expeditions around the UK and Ireland to 'tie-in' tide gauge benchmarks with high precision GPS observations in the following locations:
- Lundy听
- Inner Hebrides听
- Sule Skerry
- Foula听
- Ireland听
- Outer Hebrides听
- Orkney, Sanday, Westray听
Publications
A review of the accuracy of VORF, including field results, can be found in:
- Iliffe, J. C., M.K. Ziebart, J.F. Turner, A.J. Talbot and A.P. Lessnoff. 2013.听听Survey Review, Volume 45, Number 331, pp. 254-262(9).
The VORF concept was applied globally to create 'VORF-Global'; a description of the method used to generate a high resolution world map of LAT can be found in:
- Turner J.F., J.C. Iliffe, M.K. Ziebart, and C. Jones. 2013.听听Marine Geodesy, Volume 36, Issue 2.
Further research extending from VORF included the development of high performance algorithms for point in polygon queries:
- Oliveira, J. F., M. Ziebart, J. Iliffe, J. Turner, and S. Robson. 2013.听听Journal of WSCG, ISSN 1213-6972, Volume 21, Number 1, p79-88.
General descriptions of the project can be found in:
- Iliffe, Jonathan, Marek Ziebart, James Turner, Joao F Oliveira, and Ruth Adams.听听GIS Professional. Issue 13, November/December 2006, pp 24 鈥� 26.
- Adams, Ruth, Jonathan Iliffe, Marek Ziebart, James Turner, and Joao F Oliveira.听听听Hydro International Volume 10 Number 10, December 2006.
A more detailed description of the methodology for deriving a continuous Chart Datum surface can be found in:
- Iliffe, Jonathan C., Marek K Ziebart and Jim F Turner. "The derivation of vertical datum surfaces for hydrographic applications". The Hydrographic Journal, No. 125, 2007, pp 3 - 8.
Further details on the methodology of deriving sea surface topography around the British Isles as part of the project can be found in:
- Iliffe, J. C., M.K. Ziebart and J.F. Turner. 2007.听听听Marine Geodesy, 30:4, 271 - 296.
A description of the methods used to derive the VORF-UK tidal level surfaces can be found in:
- Turner J.F., J.C. Iliffe, M.K. Ziebart, C. Wilson and K.J. Horsburgh.听 2010.听听Journal of Atmospheric and Oceanic Technology, 27(3), pp. 605-613.
A discussion on the future use of the VORF+GNSS concept in hydrographic surveying can be found in:
- Ziebart, M., J. Iliffe, J. Turner, J. Oliveira and R. Adams (2007),听 proceedings of ION GNSS2007, Fort Worth, Texas, USA, September听2007.