PhD Studentship: Studying the performance of solid walls with water-repellent surface treatments
28 May 2020
We are accepting applications for a funded PhD studentship in 'Investigating the performance of solid walls with water-repellent surface treatments'.
![plant in front of a water damaged wall](/bartlett/environmental-design/sites/bartlett_environmental_design/files/styles/large_image/public/erbe_studentship_advert_image_800x500_0.jpg?itok=zbgqsoPX)
Solid-wall buildings account for around a quarter of the UK building stock. The heat loss associated with solid walls is among the highest across all wall constructions in the UK, but little has been done to improve their thermal performance; 91% of solid wall dwellings are yet to be insulated. The challenge of solid walls is that they rely on a moisture balance in the building structure, which is key to the durability of such buildings and the health of occupants. This moisture balance is likely to change both due to climate change and due to the interventions done to improve the energy efficiency of the wall, potentially leading to higher moisture accumulation in walls and affecting energy use, occupants’ health and comfort, and durability of buildings.
This opportunity is funded by the Engineering and Physical Sciences Research Council () through the EPSRC Centre for Doctoral Training in Energy Resilience and the Built Environment () and co-funded by and the , this project aims to investigate the long-term hygrothermal performance of solid walls with water-repellent surface treatments
Background
A damp solid wall has poorer thermal performance than a dry wall, hence affecting its energy performance. Under future climate scenarios, the moisture content of solid walls is likely to increase, particularly due to higher rainfall intensity. Moreover, solid wall insulation changes the moisture balance of the existing wall; hygrothermal simulations often highlight the need for additional rainwater protection if internal wall insulation is to be installed.Ìý
Therefore, providing rainwater protection is often necessary for solid-wall buildings that are facing higher exposure to atmospheric agents. Traditional methods include incorporating additives (e.g. tallow or linseed oil) into limewash, perhaps in conjunction with rendering and bedding mortars, which might affect the aesthetic appearance of the building, e.g. if the building was not previously rendered. On the other hand, there is some evidence on the long-term effectiveness of modern colourless water-repellent surface treatments, which would allow preservation of the aesthetic appearance of the building. If effective, these surface treatments have the potential to be an enabling technology for the improvement of the energy performance of solid-walls.
Although water-repellents can have benefits, in the past, there has been evidence of the poor performance of silicone water-repellent surface treatments associated with the reduction of vapour permeability of the external surface. Recent developments in the chemical composition of water-repellent treatments are claimed to have improved this feature. ÌýHowever, there are uncertainties of long-term performance, particularly on building materials of different mineralogy and porosity.
In a broader level, little evidence is available on the positive and long-term adverse effects of water-repellent surface treatments on building energy performance, occupants’ health and durability. To this end, the research aims to investigate the long-term hygrothermal performance and effectiveness of solid walls with water-repellent surface treatments.
Aim
In particular, the research will address the following research questions, which are in line with both the Technology and system performance and Comfort, health and well-being ERBE themes:
- What evidence already exists in relation to water-repellent surface treatments in traditional solid walls?
- What is the influence of these treatments on the pore structure of material usually found in external walls of traditional buildings?Ìý
- What is the influence of these treatments on the improvement of the thermal transmittance of solid walls?
- What is the long-term hygrothermal performance of solid walls with water-repellent surface treatments?
- What are the long-term adverse and positive effects on solid walls with water-repellent surface treatments?
- What are the long-term harmful and positive effects on reapplying water repellents?
- What is the influence of water-repellent surface treatments on the indoor air quality and energy performance of a solid-walled building?
Industry sponsorÌý
The student will have the opportunity to work in the IEDE Environmental Laboratory and collaborate closely with and the (industrial sponsors) and with the organisations supporting the project.
Person Specification
Seeking highly motivated applicants with good degrees (min 2:1) in Science related qualifications, preferably engineering, physics or chemistry. Previous experience in, or knowledge of, energy retrofitting interventions, monitoring and modelling is preferable but not required.
Ìý
Applicants must also meet the minimum language requirements of UCL.
Applicants should meet the
Ìý
Details
- Part of theÌýEnergy Resilience and the Built Environment (ERBE) CDT.
- Supervisors: Dr Hector Altamirano and Dr Valentina Marincioni (IEDE). Joe Orsi, engaged on behalf of industry sponsors and the
- Stipend: The studentship will cover UK course fees and en enhanced tax-free tripend of approx. £18,000 per year for 4 years along with a substantial budget for research, travel, and centre activities.
- Dates: 4 years from September 2020
Application procedure
Stage 1
Please submit a pre-application by email to the UCL ERBE Centre Manager (bseer.erbecdt@ucl.ac.uk)Ìý with Subject Reference: 4-year PhD in Investigating the performance of solid walls
The pre-application should include the following:
- A covering letter clearly stating your motivation, and stating your understanding of eligibility according to these guidelines:
- CV
- Names and addresses of two academic referees
- A copy of your degree certificate(s) and transcript(s) of degree(s.
Stage 2
The interview panel will consist of the project’s academic supervisor at »Ê¼Ò»ªÈË, a representative of the industrial sponsor and a representative of the ERBE CDT Academic management. Only shortlisted applicants will be invited for an interview.
Following the interview, the successful candidate will be invited to make a formal application to the UCL Research Degree programme.Ìý
Deadline for applications: Sunday 12th July 2020, 23:59 (UK time).
Ìý
Contact us
For further details about the admission process, please contact: bseer.erbecdt@ucl.ac.uk
For any further details regarding the project contact Dr Hector Altamirano h.altamirano-medina@ucl.ac.uk or Dr Valentina Marincioni v.marincioni@ucl.ac.uk;
You will be undertaking this project in UCL at the main (Bloomsbury) campus as part of the new EPSRC-SFI Centre for Doctoral Training in Energy Resilience and the Built Environment (ERBE CDT). This is a collaboration between UCL, Loughborough University and Marine and Renewable Energy Ireland (MaREI). For more information please see
Photo credit
Jesse Bowser, Unsplash